User’s Manual of SGSW-24040 / 24240 Series
LLDP Info
Description:
Show LLDP neighbor device information.
Syntax:
Parameters:
<port_list>: Port list or 'all', default: All ports
LLDP CDP Aware
Description:
Set or show if discovery information from received CDP ( Cisco Discovery Protocol ) frames is added to the LLDP
neighbor table.
Syntax:
LLDP c
dp_aw
are [<port
_list>]
[enable|di
sable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable CDP awareness (CDP discovery information is added to the LLDP neighbor table)
disable: Disable CDP awareness
(default: Show CDP awareness configuration)
Default Setting:
disable
Example:
Enable CDP aware finction for port1~4
SWITCH/>lldp cdp_aware 1-4 enable
To Next Page
Loading...
Need help?
General