Planet SGSW-24040 - 6.18 Configuration Command

User’s Manual of SGSW-24040 / 24240 Series
511
6.18 Configuration Command
Configuration Save
Description:
Save configuration to TFTP server.
Syntax:
Config Save <ip_server> <file_name>
Parameters:
<ip_server>: TFTP server IP address (a.b.c.d)
<file_name>: Configuration file name
Configuration Load
Description:
Load configuration from TFTP server.
Syntax:
Config Load <ip_server> <file_name> [check]
Parameters:
<ip_server>: TFTP server IP address (a.b.c.d)
<file_name>: Configuration file name
check : Check configuration file only, default: Check and apply file