Planet SGSW-24040 - 6.4 Port Management Command

User’s Manual of SGSW-24040 / 24240 Series
358
6.4 Port Management Command
Port Configuration
Description:
Show port configuration.
Syntax:
Port Configuration [<port_list>] [up|down]
Parameters:
<port_list>: Port list or 'all', default: All ports
up : Show ports, which are up
down : Show ports, which are down
(default: Show all ports)
Example:
Display port1~4 status
SWITCH/>port configuration 1-4
Port Configuration:
===================
Port State Mode Flow Control MaxFrame Power Excessive Link
---- -------- ------ ------------ -------- -------- --------- ----
1 Enabled Auto Disabled 9600 Enabled Discard Down
2 Enabled Auto Disabled 9600 Enabled Discard Down
3 Enabled Auto Disabled 9600 Enabled Discard Down
4 Enabled Auto Disabled 9600 Enabled Discard Down
Port Mode
Description:
Set or show the port speed and duplex mode.
Syntax:
Port Mode [<port_list>] [10hdx|10fdx|100hdx|100fdx|1000fdx|auto]