Planet SGSW-24040 - Security Network Limit Agetime; Security Network Limit Port

User’s Manual of SGSW-24040 / 24240 Series
417
Syntax:
Security Network Limit Aging [enable|disable]
Parameters:
enable : Enable aging
disable : Disable aging
(default: Show current enabledness of aging)
Default Setting:
disable
Example:
Enable limit aging
SWITCH/>security network limit aging enable
Security Network Limit Agetime
Description:
Time in seconds between check for activity on learned MAC addresses.
Syntax:
Security Network Limit Agetime [<age_time>]
Parameters:
<age_time>: Time in seconds between checks for activity on a MAC address (10-10000000 seconds)
(default: Show current age time)
Default Setting:
3600
Example:
Set age time in 100sec.
SWITCH/>security network limit agetime 100
Security Network Limit Port
Description:
Set or show per-port enabledness.