User’s Manual of SGSW-24040 / 24240 Series
Syntax:
QoS Weight [<port_list>] [<class>] [<weight>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<class> : Traffic class low/normal/medium/high or 1/2/3/4
<weight> : Traffic class weight 1/2/4/8
QoS Rate Limiter
Description:
Set or show the port rate limiter.
Syntax:
QoS Rate Limiter [<port_list>] [enable|disable] [<bit_rate>]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable rate limiter
disable : Disable rate limiter
(default: Show rate limiter mode)
<bit_rate> : Rate in 1000 bits per second (500-1000000 kbps)
Default Setting:
Disabled, 500kbps
Example:
Set 1000kbps rate limiter for port17~24
SWITCH/>qos rate limiter 17-24 enable 1000
QoS Shaper
Description:
Set or show the port shaper.
Syntax:
QoS Shaper
[<port_li
st>] [en
able|di
sable] [<bit
_rate>
]
To Next Page
Loading...
Need help?
General