Planet SGSW-24040 - Page 214

User’s Manual of SGSW-24040 / 24240 Series
214
Figure 4-10-4 ACL Ports Configuration page screenshot
The page includes the following fields:
Object Description
• Port
The logical port for the settings contained in the same row.
• Policy ID
Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
• Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
• Rate Limiter ID
Select which rate limiter to apply to this port. The allowed values are Disabled
or the values
1
through
15
. The default value is "Disabled".
• Port Copy
Select which port frames are copied to. The allowed values are Disabled or a
specific port number. The default value is "Disabled".