Planet SGSW-24040 - Page 248

User’s Manual of SGSW-24040 / 24240 Series
248
Requests ccessRequests to the server. This does not
include retransmissions.
Tx Access
Retransmissio
ns
radiusAuthClientExtA
ccessRetransmission
s
The number of RADIUS
Access-Request packets
retransmitted to the RADIUS
authentication server.
Tx Pending
Requests
radiusAuthClientExtP
endingRequests
The number of RADIUS
Access-Request packets
destined for the server that
have not yet timed out or
received a response. This
variable is incremented when
an Access-Request is sent and
decremented due to receipt of
an Access-Accept,
Access-Reject,
Access-Challenge, timeout, or
retransmission.
Tx Timeouts radiusAuthClientExtT
imeouts
The number of authentication
timeouts to the server. After a
timeout, the client may retry to
the same server, send to a
different server, or give up. A
retry to the same server is
counted as a retransmit as well
as a timeout. A send to a
different server is counted as a
Request as well as a timeout.
• Other Info
This section contains information about the state of the server and the latest round-trip
time.
Name RFC4668 Name Description
State - Shows the state of the server. It takes one of the
following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP
communication is not yet up and running.
Ready: The server is enabled, IP communication is