User’s Manual of SGSW-24040 / 24240 Series
Figure 4-17-11 Use PLANET Smart Discovery Utility to display the IP address of stack master
Step 4: Choose “Stack \ Stack Configuration” from menu tree. You can see the Stack had established automaticatlly. As the
below screen appears:
1. The Switch ID is automatically assigned to the switches
2. All switches with same Priority value “3”.
3. The one can’t be delete is the Stack master.
Figure 4-17-12 Stack Configuration
Step 5: We wish to make the SGSW switch with MAC “00-30-4f-76-27-10” / Switch ID=2 to become the Stack Master and swap
the Switch ID to 1.
Select the switch with ID=1 and assign a new ID for this unit, for example: ID=4
To Next Page
Loading...
