Planmeca ProMax 3D Plus - Page 102

3D Max 139 kg (306 lb)
Scanning ceph 26 kg (57 lb)
Planmeca ProCeph 20 kg (44 lb)
Environmental requirements
Transport:
Temperature -20°C - +60°C (-4°F - +140°F)
Relative humidity 10 - 90% RH (non-condensing)
Air pressure 700 - 1060 hPa
Storage:
Temperature -10°C - +50°C (+14°F - +122°F)
Relative humidity 10 - 90% RH (non-condensing)
Air pressure 700 - 1060 hPa
Operating:
Temperature • Pan / scanning ceph: +10°C - +40°C (+50°F
- +104°F)
• 3D / ProCeph: +10°C - +35°C (+50°F -
+96°F)
Relative humidity 10 - 90% RH (non-condensing)
Air pressure 800 - 1060 hPa
Max. altitude 2000 m (1.25 miles)
Image properties
Pan / ceph CCD:
Pixel size 48 μm
Pan active surface 6 x 146 mm (0.24 x 5.74 in.)
Ceph active surface 6 x 292 mm (0.24 x 11.15 in.)
Planmeca ProCeph:
Flat panel pixel size 139 μm
Flat panel active surface 302 x 249 mm (11.89 x 9.80 in.)
3D:
Flat panel pixel size 127 μm
Flat panel active surface • 3D s / 3D Classic: 130 x 130 mm (5.12 x
5.12 in.)
• 3D Plus / 3D Mid: 146 x 146 mm (5.74 x 5.74
in.)
• 3D Max: 193 x 242 mm (7.6 x 9.5 in.)
SmartPan:
Flat panel pixel size 127 μm
Flat panel active surface • 3D s / 3D Classic: 8 - 25 x 130 mm (0.31 -
0.98 x 5.12 in.)
• 3D Plus / 3D Mid: 8 - 25 x 146 mm (0.31 -
0.98 x 5.74 in.)
• 3D Max: 13 - 25 x 162 mm (0.51 - 0.98 x
6.38 in.)
17 Technical data for Planmeca ProMax product family
98 Planmeca ProMax User's manual