Plus C-20W - Moving the Sheet Surface Manually

E-16
Printing
Press the Color Print or the B/W Print button to print.
• Thereadingoperationisperformedforaone-sheetportion(whilethesheetisscrolled)andtheprintingoperationis
performed.
Cancellation of the print operation in progress
WhentheON/Standby buttonispressed,thereadingofthesheetstops,andthepartiallyreadimagedataisprinted.
Waituntilthesheetisexpelledfromtheprinter.
Note
• IftheON/Standby buttonispressedwhilethesheetsurfaceisbeingread,printingisinterruptedandonlypart
oftheimagewillbeprinted.
 Tomovethesheetsurface,waituntilscrollingstops,thenpresstheScroll/Stop button.
• Theone-screenportionisreducedtoA4papersizeandprinted.
 Forwidetypecaptureboards(modelC-20W),theimageiscompressedabout75%inthehorizontaldirection.To
printwiththesameproportionsastheimageonthesheetsurface,see“MakingtheDeviceSettings”(pageE-31).
• Aflashing“ ”inthedisplaywindowindicatesaprinterror.See“MeaningofErrorMessages”onPageE-46.
• Whenprinting,atimestamp(dateandtime)isprintedatthetoprightofthesheet.See“CBSetup”onpageE-30,
E-38.
or
• Switchofftheprinterpower.
Note
• WhentheEraseReminderfunctionissetto“Enable”
 When the ON/Standby  button ispressed, the display window and all the indicators flash
simultaneously, the sheet automatically moves to the surface that is not yet erased and the
powerturnsoff.TosettheEraseReminderfunctionto“Disable”,seepageE-32,E-38.
 *TheEraseReminderfunctionmaynotworkproperlyduetodirtonthesheet'sadhesivesec-
tionsormarkerresidue.
• Ifnobuttonisoperatedwithin30minutes,thepowerturnsoffautomatically(autopoweroff).
 Whenthepoweristurnedoff,scannedimagesstoredintheunit’sinternalmemoryarecleared.
• TheautopowerofffunctioniscanceledwhenthecaptureboardandcomputerareconnectedbyUSBcable.
Whenthecaptureboardisnotgoingtobeused,presstheON/Standby button and
switch off the power (standby mode).
Moving the sheet surface manually
The sheet can bemoved even when the power of thecaptureboard is
switchedoff.
Thesheetcanbemovedwithyourhandeitherinleftorright.Pleaseplace
yourhandattheverticalcenterandmovethesheetslowly.
Notice
• Quickmovementcancausedamagetothedrivemechanismofthe
captureboard.
Note
• Whenthe Erase Reminder function is set to “Enable”, the Erase
Reminderfunctionmaynotoperateproperlyifthesheetsurfaceis
movedbyhand.
https://www.supplychimp.com/