PMDG 737 - Using Simbrief to Create a Flight Plan and Weather Data

0.00.120 PMDG 737
INTRODUCTION
NOVEMBER 2022 DO NOT DUPLICATE For Simulator Use Only
files were found in each subdirectory. Selecting one of the subfolders will
bring up a new page listing all the relevant flight plans in it. Once you
select one of the flight plans the name will be highlighted and a
REQUEST> prompt will appear in 6R. Pressing LSK 6R will return to the
RTE page and initiate the uplink procedure for the selected route.
While in the REQUEST CO ROUTE page or in the subfolder files listing
pages, you can further filter the displayed routes by typing on the
scratchpad. Any characters typed on the scratchpad will filter the
displayed routes to those with a file name starting with the entered
characters.
If there is only one flight plan file matching the RTE page selection criteria
(origin + destination or flight number) the REQUEST CO ROUTE page is
not displayed and the uplink procedure is initiated immediately, directly
from the RTE page. This opens up a lot of interesting methods of
organizing your flight plans – you could make a folder with routes
organized by flight number, simply enter that number into the FMC and
press ROUTE REQUEST and the datalink simulation will load the correct
route automatically.
Using Simbrief to create a flight plan and weather data
In your SimBrief Downloader, define an additional two folders pointing at
MS Store:
C:\Users\{username)\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb
3d8bbwe\LocalState\packages\pmdg-aircraft-737\work\Flightplans
Steam:
C:\Users\{username}\AppData\Roaming\Microsoft Flight Simulator\Packages\
pmdg-aircraft-737\work\Flightplans
under PMDG Flightplan
and
MS Store:
C:\Users\{username)\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb
3d8bbwe\LocalState\packages\pmdg-aircraft-737\work\WX
Steam:
C:\Users\{username}\AppData\Roaming\Microsoft Flight Simulator\Packages\
pmdg-aircraft-737\work\WX
under PMDG Wind Uplink.