EasyManua.ls Logo

PMDG 737 - Opt Equip 2; Opt Equip 3; Opt Equip 4

Default Icon
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0.00.68 PMDG 737
INTRODUCTION
NOVEMBER 2022 DO NOT DUPLICATE For Simulator Use Only
PAGE 14/16 OPT EQUIP 2
EXT LIGHT PACKAGE: Offers the option of several different light
types, including incandescent, LED, and pulse options.
EYEBROW WINDOWS: Boeing no longer offers eyebrow
windows as an option on the 737, but this setting allows you to
decide if your airplane has the older style windows, or not.
CABIN LAYOUT: You can use this setting to choose between a
single class cabin (all coach) or a two class setup with a mix of
first class and coach seating. Your choice here will be reflected in
the weight and balance system.
AIRSTAIRS INSTALLED: Select whether to have the airstairs at
door 1L installed and available for use.
CUTOFF SWITCH STYLE: Selects either the old paddle-style
fuel cutoff levers, or the newer cap-style switches as on the 747,
757, 767, 777, and 787. Note that some aircraft have these new
switches as a default, such as the 900ER, so they cannot be
selected manually in those aircraft.
PAGE 15/16 OPT EQUIP 3
WIFI ANTENNA: Many airlines are retrofitting their fleets to
include onboard internet services for customer use. The airplanes
so equipped have a SATCOM antenna mounted on the top of the
fuselage. This setting will allow you to choose whether your
aircraft has a SATCOM antenna installed or not and if it will be
2KU or KU band.
YOKE CHECKLISTS: These settings allow you to determine if a
checklist appears on the yoke clip of the captain and/or first
officer. You can use the yellow marker to keep your place on the
checklist if desired.
HEADRESTS: Selections for CAPT and F/O. These settings
allow you to show or hide the modeled headrests. This is useful if
you are using a camera program that occasionally shifts the
viewpoint into the headrest, which can cause clickspots to
disappear.
PAGE 16/16 OPT EQUIP 4
AUTO IGNITION: Changes the center position of the ignition
selector between OFF and AUTO. The AUTO function sets the
ignition control to automatically protect against flameouts.

Table of Contents

Related product manuals