0.00.52 PMDG 737
INTRODUCTION
NOVEMBER 2022 DO NOT DUPLICATE For Simulator Use Only
condition in the future and find all switches and system in the
desired settings. (This is not the same as saving a flight because
it merely saves the condition of the airplane, thus allowing you to
load your panel configuration into any flight you wish.)
• STARTUP STATE: This prompt allows you select a saved panel
state that you would like the simulation to use as your default
panel condition every time the simulation is launched. For
example, if you were to select a Cold and Dark scenario as the
STARTUP STATE for the airplane, you will be presented with
that cold and dark panel state whenever and wherever you
choose to load the PMDG 737.
To Next Page
Loading...