0.00.84 PMDG 737
INTRODUCTION
NOVEMBER 2022 DO NOT DUPLICATE For Simulator Use Only
PAGE 1/2
• FPS LIMIT: Here you can adjust the frame rate (FPS) limit of the
PFD, the ND/MAP, EICAS and lower EICAS, ISFD and HGS by
entering the desired FPS limit. Enter the desired limit into the
scratchpad and press the LSK of the item you want to change.
When the entries are blanked with two dashes, the display is
unlocked and will display the highest FPS it can.
• DISABLE DISPLAYS: This setting allows you to disable the First
Officer’s display or the Captain’s display. To show both displays,
set this value to NONE.
PAGE 2/2
• TERR IMAGE DETAIL: This setting controls the ND range at
which the terrain display begins averaging individual terrain
samples together so as to not affect performance. If you
experience a performance hit with the terrain display on, try
setting this option to medium or low.
• TERR IMAGE SIZE: This setting controls the resolution of the
internal bitmap terrain cells are drawn to before being displayed
on the ND. Higher settings look better at the possible expense of
performance.
• TERR DITHER COLORS: This setting determines whether or not
the terrain map is dithered, which results in a realistic “dot” type
look to the display. If turned off, the display will be drawn with
solid colors. This setting is mainly visual and you can set it to
your preference.
• TERR SWEEP: This setting turns the raster sweep effect on or
off. In the real aircraft, the terrain mode draws to the ND using the
same internal hardware that the weather radar does. This is
simulated and you will see a sweep effect across the ND
simulating the raster hardware’s buffered display method.
To Next Page
Loading...