3
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
3.89
4. Inspect inside of hub
q
for wear, galling, or uneven
surface.
5. Inspect crankshaft bearing surface
e
for abnormal
wear.
6. Remove starter gear from the flywheel assembly.
7. Remove the three one-way clutch retaining bolts.
8. Remove clutch and inspect both sides of drive rollers
r
and roller contact surface
t
inside hub for wear,
damage, or uneven surface.
9. Inspect drive surface of starter gear
y
and bearing
surface
u
for wear, damage, or uneven surface. If any
starter clutch component is worn or damaged,
replace clutch, clutch hub, and starter gear.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
