6
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
6.7
SHIFT LEVER
REMOVAL
1. Remove the shift knob cover
q
, retaining screw
w
and shift knob
e
from the shift lever
r
.
2. Remove the screws retaining the center console
using a T27 and T30 Torx driver. Remove the
console from the vehicle.
3. Remove the clip
t
and washer
y
retaining the shift
cable
u
to the shift lever and disconnect the cable
end from the lever.
4. Remove the retaining ring
i
and slide the shift lever
off the mounting bracket and out from the frame.
5. Remove both bushings
o
from the shift lever and
service as needed.
INSTALLATION
1. Perform the removal steps in reverse order to install
the gear shift lever (lever, cable, console, shift knob)
TRANSMISSION
To Next Page
Loading...
Need help?
General
