2
9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual
© Copyright Polaris Industries Inc.
2.17
WARNING
Never remove the pressure cap when the engine is
warm or hot. Escaping steam can cause severe burns.
The engine must be cool before removing the pressure
cap.
4. Remove the pressure cap. Using a funnel, add
coolant to the top of the radiator filler neck.
5. Reinstall the pressure cap.
NOTE
Use of a non-standard pressure cap will not allow the
recovery system to function properly.
6. Remove the recovery bottle cap.
7. Fill the recovery bottle to the “MAX” mark with Polaris
Premium 50/50 Anti-Freeze/Coolant or a 50/50
mixture of antifreeze/coolant and distilled water as
required for freeze protection in your area.
8. Reinstall the recovery bottle cap.
9. If coolant was required, start engine and check for
leaks. Make sure radiator fins are clean to prevent
overheating.
MAINTENANCE
To Next Page
Loading...
Need help?
General
