Polaris RZR 170 2009 Service Manual

8.7
ELECTRICAL
8
TRANSMISSION SWITCH
Transmission Switch - Circuit Breakout
Testing
1. With the switch installed, use an ohmmeter to test
continuity between the switch leads and engine ground.
2. First, shift the transmission into “neutral” and test for
continuity between the DG/WH wire and ground.
3. Then shift the transmission into “reverse” and test for
continuity between the DB wire and ground. In both tests
you should have continuity to ground.
PartShark.com
877-999-5686

Polaris RZR 170 2009 Specifications

General

Brand	Polaris
Model	RZR 170 2009
Category	Offroad Vehicle
Language	English