EasyManua.ls Logo

Polaris RZR 170 2009 - Engine Crankcase Ventilation System Inspection; Engine;Transmission Mount Locations

Polaris RZR 170 2009
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.21
MAINTENANCE
2
10. Reinstall the drain plug. Torque to specification.
11. Remove the dipstick. Add recommended oil. Do not
overfill.
12. Reinstall the dipstick.
13. Start the engine. Allow it to idle for a short period.
14. Stop the engine and inspect for leaks.
15. Check the oil level. Add oil as needed to bring the level to
the ‘Safe Range’ on the dipstick.
IMPORTANT: Over-filling engine crankcase will result
in oil entering the air box. Maintain the recommended
oil level.
Engine Crankcase Ventilation System
Inspection
The engine is equipped with a crankcase ventilation. Follow
the breather hoses from the airbox to the engine and inspect
the hoses for possible kinks or wear. The hoses are form-fitted
for a proper fit.
NOTE: Make sure lines are not kinked or pinched.
Engine/Transmission Mount Locations
Periodically inspect engine/transmission upper and lower
mounts for cracks or damage.
= T
Crankcase Drain Plug: 18 ft. lbs. (23 Nm)
Recommended Engine Oil:
Polaris Synthetic Youth 4-Stroke Oil
SAE 40 (Above 32F)
Quart - (PN 2876248)
Gallon - (PN 2876249)
Polaris Semi-Synthetic Oil
20W-40 (Below 32F)
Quart - (PN 2872175)
Gallon - (PN 2872176)
Capacity:
37 oz. (1.1 ltr)
PartShark.com
877-999-5686

Table of Contents

Related product manuals