Polaroid 600SE

17
2 - Operation
Steps to Operate the Camera (Figure 2-1)
• Mount flash attachment.
• Select and mount lens (model 600SE only).
• Position viewfinder selector switch to 127 or 150.
• Mount filter.
• Load film.
• Remove dark slide.
• Frame the subject in the viewfinder.
• Focus.
• Set the shutter speed and lens aperture.
• Cock the shutter lever.
• Depress the shutter release.
• Pull white paper tab.
• Pull yellow film tab.
• Time development of film.
• Peel finished photograph from yellow tab.
• Repeat sequence for each picture until the pack is emptied.
• Change film holder, lens, flash attachment, filter, etc., as required, between photographs.