Powtran PI9000 series User Manual

Chapter 5 Function parameter
110
0: Unrepeatable Two different multi-function input terminals can not be set to the
same function.
1: Repeatable Two different multi-function input terminals can be set to the same
function.
F1.41
Keyboard
potentiometer X1
3
0～100.00%
0.00%
☆
Keyboard potentiometer set value start point
F1.42
Keyboard
potentiometer X2
3
0～100.00%
100.00%
☆
Keyboard potentiometer set value end point
F1.43
Keyboard
potentiometer set
value
3
0～100.00%
-
☆
Display keyboard potentiometer value, through the keyboard potentiometer can modify
Settings under monitoring menu.
Keyboard potentiometer Settings can be used as frequency analogy, setting frequency =
maximum frequency x keyboard potentiometer Settings.
Eg.：Keyboard potentiometer Settings can be used as a PID given value，PID given
value= Keyboard potentiometer Settings.
F1.44
Keyboard
potentiometer X1
corresponding value
Y1
3
-100.00%～+100.00%
0.00%
☆
F1.45
Keyboard
potentiometer X2
corresponding value
Y2
3
-100.00%～+100.00%
100.00%
☆
The end of the
corresponding
value
The start of
the
corresponding
value
end
start
The end of the
corresponding
value
The start of
the
corresponding
value
end
start
F1.46
Keyboard
potentiometer
control
3
Bits
Keyboard
potentiometer power
down reserve state
00
☆
Power down protection
0
Power down zero clear
1
Ten
Keyboard
potentiometer set stop

Powtran PI9000 series Specifications

General

Brand	Powtran
Model	PI9000 series
Category	Inverter
Language	English