Precor Experience Series 800 line EFX - Page 104

2. Tension the first stage drive belt to 140-150 lbs (63.5 - 68 kgs), see ."First Stage Drive
Belt Tension Adjustment" on page32.
3. Verify the second stage drive belt is within the specified tension 110-120 lbs (50- 54.4
kgs), see "Second Stage Drive Tension Adjustment" on page36.
4. Tighten the two Drive Components Assembly carriage bolt fasteners, torque to 180 in-
lbs (20.3 Nm).
5. Reinstall the right and left Stairarm and Drive Housing covers, see "Drive Housing
Covers Replacement" on page59.
Experience Series 800 Line EFX
97
5 Replacement Procedures
Cranks and Input Bearing Assembly Replacement