Precor Experience Series 800 line EFX User Manual

Step-upPulley and Tensioner Assembly Exploded View
Procedure
Review entire procedure before starting.
Removal Instructions
1. Remove the Drive Access cover, see "Drive Access Cover Replacement" on page56.
2. Remove the left and right Drive Disk covers, see "Drive Disk Covers Replacement" on
page57.
3. Remove the left and right Stairarms and the Drive Housing covers, see "Drive Housing
Covers Replacement" on page59.
4. Remove the Drive Components Assembly, see "Drive Components Assembly Replace-
ment" on page86.
TIP: The Step-up Pulley and Tensioner mounting hardware (spacers and isolators)
can easily fall out of the mounting holes. Take care to keep track of these components
for installation, see "Step-upPulley and Tensioner Assembly Exploded View" above.
Experience Series 800 Line EFX
83
5 Replacement Procedures
Step-up Pulley and Tensioner Assembly Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English