Precor Experience Series 800 line EFX - Ramp-To-Drive Transition Cover Replacement

Ramp-to-Drive Transition Cover Replacement
Ramp-to-Drive Transition Cover Replacement
ID Description
Drive Access Cover
Removal Instructions
Remove the ramp-to-drive transition cover by lifting upward to unsnap the mounting clips.
Installation Instructions
Reinstall the ramp-to-drive transition cover by positioning the cover over the ramp and
drive housing covers and pressing down to snap the mounting tabs in place.
Experience Series 800 Line EFX
54
5 Replacement Procedures
Covers and Panels Replacement