Precor Experience Series 800 line EFX User Manual

Drive Access Cover Replacement
Drive Access Cover Replacement
ID Description
Drive Access Cover
Drive Top Cover
Removal Instructions
1. Use a #3 Phillips screwdriver to remove the two fasteners located at the bottom of the
drive access cover . Slide the access panel downward and away from the frame to
remove. Retain fastener hardware for installation.
Installation Instructions
1.
Slide the top of the drive access cover under the lip of the drive top cover and
then pressing the cover into position over the access cover opening.
2. Secure cover with the two # 3 Phillips screw fasteners.
Experience Series 800 Line EFX
56
5 Replacement Procedures
Covers and Panels Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English