Precor Experience Series 800 line EFX User Manual

l Error Code Data
o
Event Time & Date Stamp
o
Error Code Number
o
Error Code Description
o
Odometer
o
Hours
o
Motor Current*
o
.Input Line Current*
o
Input line voltage*
o
Buss Voltage*
o
OEM Factory only data
l Other Network Connectivity & Component Interface failure data
* machine dependent parameter.
Removing Error Codes:
Unlike the Error Log used on P10, P20, and P30, you cannot manually delete (clear) error
codes from the Event Log.
Active Status Light (ASL)
About
The Active Status Light (ASL
1
) is a service and maintenance status light located at the rear of
the EFX on the lower right side of the right drive housing cover.The ASL provides a visual indic-
ation of the machine operational status. The current implementation supports four states: 1)
Solid blue - indicates normal operation, 2) pulsing blue - indicates preventative maintenance is
required; 3) Solid yellow - indicates an error has occurred but the machine is useable; and 4)
pulsing yellow - indicates a loss of major function was detected. The ASL also functions as the
ASL "Wakeup" switch used to temporarily power-on the ASL and as a shortcut method to
clear error states. The ASL also functions as the ASL "Wakeup" switch used to temporarily
power-on the ASL and as a shortcut method to clear error states.
1
Active Status Light: Service and maintenance status light.
Experience Series 800 Line EFX
133
6 Troubleshooting
Active Status Light (ASL)

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English