Precor Experience Series 800 line EFX User Manual

1Introduction
If you are not a Precor certified servicer, you must not attempt to service any Precor Product.
Call your dealer for service.
WARNING: This service documentation is for use by Precor certified servicer pro-
viders only. Personal injury can result from electrical shock and/or mechanical moving
parts.
This service manual applies to the Experience™ Series 800 Line EFX
®
models with the
EFX800-16 Base.
Model EFX800-16 Base Configuration
EFX833 Fixed Arms, Moving CrossRamp, and P30 console
EFX883 Fixed Arms, Moving CrossRamp, with P82 console
EFX835 Moving Arms, Moving CrossRamp, and P30 console
EFX885 Moving Arms, Moving CrossRamp, and P82 console
This document provides information to service the equipment base independent of the
installed console. For console service documentation, refer to the particular console service
manual.
This document contains information required to perform Troubleshooting and replacement pro-
cedures required to repair and maintain this equipment including: general product information,
software diagnostic procedures, preventative maintenance procedures, inspection and adjust-
ment procedures, Troubleshooting procedures, replacement procedures and system block
and wiring diagrams.
Experience Series 800 Line EFX
1
1 Introduction

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English