Precor Experience Series 800 line EFX User Manual

Battery Replacement
About
This procedure provides instruction to determine the condition of the battery to remove and
install the Battery.
Determining the battery condition
Use the service software Hardware Validation BATTERY TEST to determine the battery con-
dition and voltage, see Hardware Validation Diagnostic Tests (51765761).
BATTERY TEST
Format XX.X VDC YY
where XX.X is the measured battery voltage in VDC (nominal 12.6 - 14.6 Vdc).
VDC:DC volts
Y is the information suffix:
C: external AC charger connected.
L:Battery is low (less than 11.4 volts).
CL: Charger is connected and battery is low.
Battery Fuse
The battery inline fuse holder is part of the battery assembly cable attached to the battery pos-
itive terminal. To remove the fuse, twist the buse holder top cap and remove.
Fuse Type:Inline 10 Amp slow blow fuse, .25" diameter
Experience Series 800 Line EFX
44
5 Replacement Procedures
Battery Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English