Precor Experience Series 800 line EFX User Manual

ABOUT MENU DESCRIPTION
description and troubleshooting information.
.Note: Use the CPA Event Log and not the CPA Event Log to find
the machine maintenance error event codes.
Console Serial Num-
ber
menu: About > Serial Number
User assigned machine name.
Lower Serial Number menu: About > Serial Number
User assigned machine name.
Friendly Name menu: About > Friendly Name
User assigned machine name.
Location menu: About > Location
Facility location code.
Console Serial Num-
ber
menu: About > Console Serial Number
Console serial number.
Release Bundle Ver-
sion
menu: About > Release Bundle Version
Provides console and base software version numbers: CPA Soft-
ware, LPCA
1
, Qt App, Boot Kernel, File System.
ETag Check Interval menu: About > ETag Check Interval
OEM use only
Heartbeat Interval menu: About > Heartbeat Interval
OEM use only
Wired MAC Address menu: About > Wired MAC Address
Wired LAN MAC address
WI-FI MAC Address menu: About > Wi-Fi MAC Address
Wireless Wi-Fi MAC address
Network Time
Server1
menu: About > Network Time Server1
NTP
2
server address
Machine Type menu: About > Machine Type
Specifies the detected machine type: TRED, AMT, EFX.
Equipment Usage menu
menu: Club Settings (5,6,5,1,5,6,5) > Equipment Usage
Information about the usage of the machine.
1
Lower PCA board
2
Network Time Protocol (NTP) is a networking protocol for clock synchronization between
computer systems over packet-switched, variable-latency data networks.
Experience Series 800 Line EFX
23
3 Standard Service and Diagnostics Menus
Club Settings Service Menu (5651565)

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English