Precor Experience Series 800 line EFX User Manual

Fixed Arms Replacement
About
This procedure provides instruction to remove and install the Fixed Arms.
Specifications
System Component
Specification
Set Screw Fastener
300 in-lbs (34 Nm)
Flat Head Screw Fastener
25 in-lbs (2.8 Nm)
Procedure
Review entire procedure before starting.
Removal Instructions
Repeat this procedure for both the right and left Fixed Arms.
1. Remove the Top Lift cover, see "Front Lift Cover Replacement" on page49.
Experience Series 800 Line EFX
112
5 Replacement Procedures
Fixed Arms Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English