Steps
1. Make sure the P82 is set to the Welcome home page.
2. Press and hold the VOL down key while pressing CH up >CH down > CH down > CH
up:
3. Use the touch keypad to type in the service access code.
Navigating the Service Menus
The hardkeys and softkeys used to navigate the service menus vary between console models.
Go to section listed below for your particular console to learn how to navigate the service
menus.
P10 & P30 consoles
The service menus are organized in a sequential top-menu to sub-menu to control item flow
architecture.
Menus and submenus are accessed using a combination of Up/Down arrow, OK, BACK, and
ENTER keys. By design, the arrow keys should be used to scroll from one menu item to the
next, while the OK, ENTER, and BACK keys are used to enter and exit submenus. In some
cases the operation is inconsistent, and the OK/ENTER key will instead advance to the next
menu rather than enter a submenu.
CONSOLE KEY FUNCTION/DESCRIPTION
Up/Down Moves up and down through the current menu.
OK Selects the current menu item or confirms settings.
BACK/CLEAR
• Returns to the previous menu level without saving changes.
• Hold Back to exit the Display test.
PAUSE • Exits service mode
• Press and hold PAUSE for greater than 6 sec will open the Error
Log or show the "Stuck Key" message when there are no logged
errors.
P80 and P82 consoles
:
The P80 and P82 consoles use the touchscreen softkeys to select items and navigate the ser-
vice diagnostic test menus.
Follow the on-screen prompts run the diagnostic tests.
Experience Series 800 Line EFX
16
3 Standard Service and Diagnostics Menus
Navigating the Service Menus
To Next Page
Loading...
Need help?
General
