Precor Experience Series 800 line EFX - Accessory Tray Cover Replacement

Accessory Tray Cover Replacement
Accessory Tray Cover Replacement
ID Description
Accessory Tray cover
Removal Instructions
1. Remove the goose neck gasket, goose neck, and top lift covers, see "Front Lift Cover
Replacement" on page49.
2.
Remove the two #2 Phillips fasteners and remove the accessory tray cover . Retain
fastener hardware for installation.
Installation Instructions
1. Reinstall the accessory tray and secure with the #2 Phillips screw fasteners.
2. Reinstall the top lift cover, goose neck cover, and the goose neck gasket, see "Front Lift
Cover Replacement" on page49.
Experience Series 800 Line EFX
53
5 Replacement Procedures
Covers and Panels Replacement