Precor Experience Series 800 line EFX User Manual

System Component Specification
Plastite screw fasteners 20 in-lbs (2.3 Nm)
Flathead screws 25 in-lbs (2.8 Nm)
Drive Assembly fastener 180 in-lbs (20.3 Nm)
Step-up Pulley and Tension Assy fasteners 180 in-lbs +/- 54 (20.3 +/_ 4.5 Nm)
Generator and Eddy Brake Assy fasteners 180 in-lbs +/- 54 (20.3 +/_ 4.5 Nm)
Linkarm fasteners 300 +/- 90 in-lbs (34 +/- 10 Nm)
Crankarm Retention Plate Fastener 30 +/- 9 in-lbs (3.4 +/- 1 Nm)
Yoke Ramp bolts 320 in-lbs (236.2 Nm)
First Stage Drive Belt Tension - New Belt 140-150 lbs (63.5 - 68 kgs)
First Stage Drive Belt Tension - Used Belt 125 - 135 lbs (56.7 - 61 Kgs)
Second Stage Drive Belt Tension - New Belt 110-120 lbs (50- 54.4 kgs)
Second Stage Drive Belt Tension - Used Belt 92 - 105 lbs (43 - 47.6 kgs)
.
Experience Series 800 Line EFX
6
1 Introduction
General Information

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English