Precor Experience Series 800 line EFX User Manual

1. Use a 5/16" socket to remove the six screw fasteners from the left drive housing cover
. Carefully slide the cover over the crankarm and remove. Retain fastener hardware
for installation.
Note:The left drive housing cover must be removed prior to removing the right cover.
Experience Series 800 Line EFX
62
5 Replacement Procedures
Covers and Panels Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English