PRESONUS StudioLive 32 - Digital Patching: USB Sends

118
12 Home
12.3 Audio Routing and the Digital Patching Screen
StudioLive™ Series III
Owner’s Manual
12.3.4 Digital Patching: USB Sends
Selecting the USB Sends menu will allow you to patch any channel send or mix to any
USB driver send. Select the USB driver send to which you’d like to route your audio
first. Then select the channel or mix from the Available Source list to the right.
Press the reset button to repatch the default routing.
The following local StudioLive sources can be sent to the USB bus to be recorded in
your favorite DAW application:
• Inputs
• Aux In A L and R
• Aux In B L and R
• Tape In L and R
• Talkback
• FlexMixes
• FX Send Mixes (pre-effects processor)
• Subgroups A-D (32-channel models only)
• Main Mix L and R
• Mono bus (StudioLive 64S only)
• Solo L and R
Press Reset Sends while USB Sends is active to revert to the default settings.