114
12 Home
12.2 User Profiles
StudioLive™ Series III
Owner’s Manual
12.2.3 Edit User Permissions
When a User Profile is set to “User,” permissions can be granted for certain functions
and denied for others.
The following features are only accessible from Administrator Profiles and always
locked out in every User Profile:
• System Settings
• Audio Routing Options
• Input Source Patching
• UCNET Options
• Scene Lock / Unlock
From the Edit Permissions screen, you can limit access to the following functions on a
per User basis:
• Channel / Bus Names. This locks the ability to rename any Channel or Bus.
• Channel Types. This locks the ability to change the Channel Type.
• Input EQ/Dynamics. This locks the ability to control Gate, Compressor, EQ, and
Limiter parameters for every input channel.
• Output EQ/Dynamics. This locks the ability to control Compressor, EQ, and
Limiter parameters for every output bus as well as Output Delay.
• Preamps. This locks the ability to adjust the Input trim, Digital Gain, Phantom
Power, Polarity, High Pass Filter, and Input Delay.
• GEQ. This locks the User out of the GEQ menu completely.
• Assigns. This locks the ability to make any channel assigments to the Main bus or
Subgroups.
• Changing FX Types. This locks the ability to change the effects types loaded into
the StudioLive Series III Effects Rack.
• Save Scenes. This locks the ability to save or create new scenes.
• Changing / Adding DCA Filter Groups. This locks the ability to create or alter
DCA Filter Groups.
Whenever a User attempts to access a function to which they do not have permission
a lock icon will be presented to them either in the upper righthand corner of the
Touch Display or on the function itself in the Touch Display.
To Next Page
Loading...
