Sets the printing speed when narrow paper
is used.
The target paper weight ranges from Ultra
Light to Medium.
Mode1:
The recommend mode for massive printing
on narrow paper (with a width of 182 mm or
less).
Switches the speed to a low speed when
printing on narrow paper.
Mode2:
The recommend mode for printing on a
small amount of narrow paper. Prints on
narrow paper without reducing the speed.
When printing on a large amount of narrow
paper, it is easier to begin the waiting time
for fixing temperature adjustment.
Mode3:
To print on wide paper after printing a large
amount of narrow paper, poor printing may
occur at the edge of paper. In this case, this
mode is recommended to reduce the poor
printing.
To start printing on wide paper after printing
on narrow paper, the waiting time for fixing
temperature adjustment may be available.
Switches the speed to a low speed when
printing on narrow paper.
To Next Page
Loading...
