Printronix LP654C - Printing Performance Issues

- 356 -
Troubleshooting for wired LAN connection
For Windows/macOS
Cause
Solution
Reference
A crossover cable is used.
Use a straight cable.
-
There is a compatibility problem
with the hub.
Press the scroll buttons on the operator panel several times
to select the proper connection from [Admin Setup] -
[Network Setup] - [Wired(LAN1) Setup] - [HUB Link
Setting].
See the Instruction Manual supplied with the hub.
-
Wired LAN (LAN1) settings are not
appropriate.
Check the wired LAN (LAN1) settings.
Admin Setup
Wired LAN settings are not
appropriate.
Either the standard wired LAN (LAN1) or wireless LAN is
enabled for the gateway address. Select the standard wired
LAN (LAN1) from [Admin Setup] - [Network Setup] -
[General Setup] - [Enabling Default Gateway].
Admin Setup
Depending on the network device
you are using, the connection may
become unstable if Energy
Efficient Ethernet (EEE) of the
wired network (LAN1) of this
machine is enabled.
Check if the switching hub supports Energy Efficient
Ethernet (EEE).
If it supports, change [Admin Setup] - [Network Setup] -
[Wired (LAN1) Setup] - [Energy Efficient Ethernet] to
[Disable] from the web page of this machine and check if it
improves.
Web page
(Managing this
machine from a
PC)
For Windows
Cause
Solution
Reference
The IP address is incorrect.
 Make sure the IP address of this machine matches
the one set on the PC.
 Make sure the IP address does not overlap with that
of other devices.
 If [IP Address Set] is set to [Auto], the address may
change dynamically. If the setting changes frequently,
change [IP Address Set] of this machine to [Manual],
and match the IP address of this machine with the one
set on the PC.
 Make sure the configured IP address, subnet mask
and gateway address are all correct.
 Make sure that the print port of the printer driver is
correct.
 For the Printronix LPR utility, check the IP address
settings with the Printronix LPR utility.
Printing the menu
map
(configuration)
Printronix LPR
Utility
The WSD port is in use.
When the print port does not function well with "WSD",
specify the IP address or short printer name of this machine
in the standard CP/IP port, and add the print port.
-
Troubleshooting for wireless LAN connection
Unable to connect to wireless LAN
For Windows/macOS
Cause
Solution
Reference
The wireless LAN module is not
enabled.
To connect to a wireless LAN, set [Extended Network] to
[Wireless].
Connecting via a
wireless LAN