Printronix LP654C - Error Message Diagnosis and Resolution

- 327 -
Error message list
Clear the error by referring to the description of the corresponding message.
Meanings of symbols used in the error message are as follows.
 Color Name: One of the following: cyan (C), magenta (M), yellow (Y), black (K)
 Tray Name: One of the following: Tray 1, Tray 2, Tray 3, Tray 4 and MP tray
 Cover Name: Either the front cover or the top cover (Output tray)
 Code: The error code number of 1 to 3 digits. The displayed number changes with the specific error.
 Pages: Number of pages to print
 Media Size: The size of paper
 Media Type: The type of paper
 Number: Number of all places where paper jams have occurred
For "---", different messages are displayed depending on the state of this machine.
When "Please see HELP for details" is displayed at the bottom of the display, if you press «HELP» on the
operator panel, the error code and solution will be displayed.
Message
Error code
Description
Cover Name Open
Please See HELP For Details
310, 311
The indicated cover is open. Close the cover.
310: Outlet tray (Top cover); 311: Front cover
Belt Unit Is Not Installed Correctly.
Please Reset
Please See HELP For Details
330
The belt unit is not properly installed. Please reinstall the belt
unit.
To install the belt unit, see "Replacing the belt unit ".
Waste Toner Box Is Not Installed
Correctly Because The Cover Is
Open. Please Reset
Please See HELP For Details
331
The waste toner box is not properly installed. Please reinstall
the waste toner box.
To replace the waste toner box, see "Replacing the black(K)
toner cartridge and the waste toner box ".
Toner Cartridge Is Not Installed
Check All Toner Cartridges Are
Installed Correctly. Please See
HELP For Details
335
One of the four color toner cartridges is not properly installed.
Please reinstall the toner cartridge that is not properly installed.
To install the toner cartridge, see "Replacing the black(K) toner
cartridge and the waste toner box " or "Replacing the toner
cartridge (C/M/Y) ".
Color Name Image Drum Is Not
Installed Correctly. Please Reset
Please See HELP For Details
340, 341, 342, 343
The image drum of the displayed color is not properly installed.
Please reinstall the image drum.
To install the image drum, see "Replacing the image drum".
340: Yellow; 341: Magenta; 342: Cyan; 343: Black
Fuser Unit Is Not Installed
Correctly. Please Reset
Please See HELP For Details
320
The fuser unit is not properly installed. Please reinstall the
fuser unit.
To install the fuser unit, see "Replacing the fuser unit ".
If the error persists, replace the fuser unit with a new one.
Fuser Unit Is Not Installed
Correctly. Reset Fuser Unit
Please See HELP For Details
348
The fuser unit is not properly installed. Please reinstall the
fuser unit.
To install the fuser unit, see "Replacing the fuser unit ".
If the error persists, replace the fuser unit with a new one.
Color Name Image Drum End Of
Life. Replace With A New Color
Name Image Drum
Please See HELP For Details
350, 351, 352, 353
The image drum of the displayed color has reached the end of
its service life. You can continue printing for a while by opening
and closing the front cover, but please replace the image drum
with a new one promptly.
To replace the image drum, see "Replacing the image drum ".
350: Yellow; 351: Magenta; 352: Cyan; 353: Black
Fuser Unit End Of Life. Replace
With A New Fuser Unit
354
The fuser unit has reached the end of its service life. Please
replace the fuser unit with a new one.