- 284 -
1
Start the Printronix LPR utility.
2
Select [Setup] from the [Option] menu.
3
Check [Auto Reconnect], and click [OK].
Setting the port number of the web page for the registered device
1
Start the Printronix LPR utility.
2
Select this machine.
3
Select [Confirm Connections] from the [Remote Print] menu.
4
Click [Detail Setup].
5
Input the port number of web page in [Port Numbers].
6
Click [OK].
Sending files to this machine registered with the Printronix LPR utility
If this machine is connected to the network and registered with the Printronix LPR utility, you can download
the print data.
1
Start the Printronix LPR utility.
2
Select the download destination device.
3
Select [Download] from [Remote Print].
4
Select the file and click [Open].
The file is sent to this machine.
Deleting unnecessary print data
You can use the Printronix LPR utility to delete unnecessary print data.
1
Start the Printronix LPR utility.
2
Select this machine.
3
Select [Job Status] from the [Remote Print] menu.
4
Select the print data to be deleted.
5
Select [Delete Job] from the [Job] menu.
Uninstalling Printronix LPR utility
Administrator privileges are required.
1
Make sure the Printronix LPR utility is closed.
2
Click [Start], and select [Printronix] - [Uninstall Printronix LPR Utility].
When [User Account Control] screen is displayed, click [Yes].
3
Click [Yes] on the confirmation screen.
To Next Page
Loading...
