- 248 -
Software list
This section describes the software that can be used with this machine. Please refer to each topic for how to
use the software.
Windows software
Operating environment
Windows 10/Windows 8.1/Windows 8/Windows 7
Windows Server 2019/Windows Server 2016/Windows Server 2012 R2/Windows Server 2012
Windows Server 2008 R2/Windows Server 2008
It is a tool to monitor the firmware version of the printer,
software version and the service life of maintenance parts.
Monitoring Tool
(Windows)
You can check the settings of this machine and set options
from the printer driver. This utility is installed automatically
when the printer driver is installed via a network
connection.
Prints RGB color samples.
You can check the RGB value for printing in the desired
color from the printed color samples.
Adjusts color matching for printing from a PC.
You can change the overall trend of the output colors by
adjusting the output color of the palette color or by
adjusting the hue and color of gamma values and primary
colors.
You can adjust the halftone density of each CMYK color
when printing from a PC. You can adjust the image color
density of photos, etc.
Configures access control settings and network settings for
this machine, and registers and deletes form data, and
registers and manages ICC profiles in the printer. The
registered ICC profile is used for color matching in the
[Graphics Pro] mode of the printer driver.
You can check the status of this machine connected to the
network or transfer print data to another device from your
PC.
macOS software
Operating environment
macOS 10.15 - 10.12, OS X 10.11
You can adjust the halftone density of each CMYK color
when printing from a PC. You can adjust the image color
density of photos, etc.
Adjusts color matching for printing from a PC.
You can change the overall trend of the output colors by
adjusting the output color of the palette color or by
adjusting the hue and color of gamma values and primary
colors.