when the paper tray
runs out of paper
during printing.
For the Windows PCL printer driver, uncheck
[Setup] - [Paper Feed Options] - [Paper feed
options] - [Auto Tray Change].
For the Windows PS printer driver, uncheck
[Layout] - [Advanced] - [Printer Features] -
[Tray Switch] - [Off].
For macOS, go to [Paper Feed] - [All Pages
From] to select the tray to be used.
When a power failure occurs
If a power failure occurs while the power is on, the power will not turn on automatically even after the power
failure is recovered.
If you want the power to turn on automatically after the power failure is recovered, select [Always On] or [Last
State] in [Boot Menu] - [After AC power supply fails].
The machine may not work properly if an uninterruptible. power supply (UPS) or inverter is used. Do not use any
uninterruptible. power supply or inverter.
With the factory default settings, when a power failure occurs, this machine acts as follows.
Reception is interrupted halfway.
Report printing is interrupted halfway.
Printing cannot be started.
To Next Page
Loading...
