Printronix LP654C - Page 352

- 353 -
12 Close the output tray, and push both sides down from top.
13 Lift the left and right handles of the fuser unit at the back of the output tray until a noise is heard,
and then release the lock.
The fuser unit cannot be removed unless its handle is raised vertically.
14 Holding both the left and right handles of the fuser unit, remove the fuser unit from this machine.
Doing so may cause burns.
When the fuser unit is hot, wait until it cools down before any operation.
Do not expose this machine with the fuser unit removed to direct sunlight or strong light (About 1,500 lux or
above). Do not leave it uncovered for more than 5 minutes even under room lighting.
15 Remove the paper left in the machine if any.