Printronix S828 - Page 176

ProgrammerManual PTX‐S828
Chapter5IPDSProgrammingInformation 174 260071‐001A
Marker Attributes Set (Set = 03):
Mask Bit Item Name Length (Bytes)
0-1 Reserved (Mask Bits = 0) –
2 Reserved (Mask Bits = 0) –
3 Precision 1
4 Symbol Set 1
5-6 Reserved (Mask Bits = 0) –
7 Marker Symbol 1
8-15 Reserved (Mask Bits = 0) –
Pattern Attributes Set (Set = 04):
Mask Bit Item Name Length (Bytes)
0-4 Reserved (Mask Bits = 0) –
5-6 Reserved (Mask Bits = 0) –
7 Pattern Symbol 1
8-15 Reserved (Mask Bits = 0) –
Arc Parameters Set (Set = 0B):
Mask Bit Item Name Length (Bytes)
0 P Value 2
1 Q Value 2
2 R Value 2
3 S Value 2
4-15 Reserved (Mask Bits = 0) –
If the self-describing instructions do not specify a current default, the printer uses the standard graphic
default for that parameter. The standard default values for the graphic segments are:
Description Value
Color Black
Line Type Solid
Line Width Normal
Character Angle No Rotation
Character Cell Standard Size (19 Dots High by 21 Dots Wide in 1/144 in. Units)
Character Direction Left to Right
Character Set Current Set (through the operator panel)
Character Font NLQ Courier
Marker Symbol Cross
Pattern Symbol Solid Shading