ProgrammerManual PTX‐S828
Chapter6IPDSExceptionReportingCodes 226 260071‐001A
X'026202' Invalid LPD X-Extent
Explanation: On the Logical Page Description
command, the X-Extent is not a valid or supported
value.
Alternate Exception Action: None.
X'026302' Invalid LPD Y-Extent
Explanation: On the Logical Page Description
command, the Y-Extent is not a valid or
supported value.
Alternate Exception Action: None.
X'026401' Insufficient Control Storage for Image
Explanation: There is insufficient control storage to
print the image data transmitted with the Write
Image command.
Alternate Exception Action: None.
X'026402' Invalid LPD Unit-Base
Explanation: On the Logical Page Description
command, the unit-base is not a valid or
supported value.
Alternate Exception Action: None.
X'026802' Invalid LPD Inline Direction
Explanation: On a Logical Page Description
command the Inline Sequence Direction value is not
a valid or supported value.
Alternate Exception Action: Use an inline
sequence direction of 0 degrees and a baseline
sequence direction of 90 degrees.
X'026902' Invalid LPD Baseline Direction
Explanation: On a Logical Page Description
command the Baseline Sequence Direction
value is not a valid or supported value.
Alternate Exception Action: Use an inline
sequence direction of 0 degrees and a baseline
sequence direction of 90 degrees.
X'026A01' Insufficient Source Image Data
Explanation: The number of source image bytes
received < the number implied in the Write Image
Control command.
Alternate Exception Action: None.
X'026A02' Invalid LPD Initial Inline
Coordinate
Explanation: On a Logical Page Description
command, the initial inline coordinate value is
not a valid or supported value.
Alternate Exception Action: None.
X'026B01' Excess Source Image Data
Explanation: The number of source image bytes
received > the number implied in the Write Image
Control command.
Alternate Exception Action: None.
X'026B02' Invalid LPD Initial Baseline
Coordinate
Explanation: On a Logical Page Description
command, the initial baseline coordinate value
is not a valid or supported value.
Alternate Exception Action: None.
X'027002' Invalid Units Value in an XOH SMS
Command
Explanation: The units value in an XOH SMS
command is invalid or unsupported.
Alternate Exception Action: None.
X'027202' Invalid SMS X-Extent
Explanation: On the Set Media Size command,
the X-extent is not a valid or supported value.
Alternate Exception Action: None.
X'027302' Invalid SMS Y-Extent
Explanation: On the Set Media Size command, the
Y-extent is not a valid or supported value.
Alternate Exception Action: None.
X'027402' Invalid SMS Unit Base
Explanation: On the Set Media Size command,
the unit-base is not a valid or supported value.
Alternate Exception Action: None.
X'028101' Insufficient Storage for Overlay or
Page Segment
Explanation: There is insufficient storage to
process an overlay or page segment.
Alternate Exception Action: None.
X'028501' Invalid DO Parameter Value
Explanation: The Overlay Identifier on the
Deactivate Overlay command is not a valid or
supported value.
Alternate Exception Action: None.
X'028A01' Invalid DPS Parameter Value
Explanation: The Page Segment Identifier on the
Deactivate Page Segment command is not a valid
or supported value.
Alternate Exception Action: None.
X'029001' Overlay Number Outside Valid
Range
Explanation:
1. The Overlay Identifier on the Begin Overlay
command is not a valid or supported value.
2. The Overlay Identifier on the Include Overlay
command is not a valid or supported value.
3. The Overlay Identifier on a Load Copy
Control command is not a valid or supported
value. Alternate Exception Action: None.
To Next Page
Loading...
