ProgrammerManual PTX‐S828
AppendixIConfigurationMenuLockout 398 260071‐001A
Intelligent Mail Bar Code 4-state with ANSI Emulation Commands
See chapter 3, pages 86 and 87 for details of these commands.
ESC [ p1; ; ; pn }
Sets bar code parameters (BC).
ASCII Code ESC [ p1; pn }
Hexadecimal Value X'1B' X'5B' p1 X'3B' pn X'7D'
Decimal Value 27 91 p1 59 pn 125
This command allows selection of the bar code characteristics such as style height, symbol rotation and so
on. The command ESC [3 t enables the bar code mode while ESC [0 t disables the mode.
p1: Bar code style
p1 FUNCTION
X ’33 34’, dec 48 49 IMB 4-state
p3: Human Readable Input (HRI)
p3 FUNCTION
0 Disables printing of the HRI
1 Enables printing of the HRI
p9: Rotation
p9 FUNCTION
0 0 degrees using current font
1 0 degrees using special HRI font
2 90 degrees using special HRI font
3 180 degrees using special HRI font
4 270 degrees using special HRI font
To Next Page
Loading...
