Printronix S828 - Page 57

ProgrammerManual PTX‐S828
Chapter1EPSON/IBMCommands  55 260071‐001A
Supported Bar Code Styles
m Style
4 Code 3 of 9 (default)
5 EAN-8
6 EAN-13
7 Code 11
9 Codabar (default start/stop = a/t)
10 Codabar (default start/stop = b/n)
11 Codabar (default start/stop = c/*)
12 Codabar (default start/stop = d/e)
13 UPC-A
14 UPS-E
15 Code 93
16 Code 128 (subset A, B, and C)
17 Code 128 (subset A, B, and C)
18 Code 128 (subset A, B, and C)
19 MSI
20 UPC 2 Supplemental
21 UPC 5 Supplemental
22 EAN 2 Supplemental
23 EAN 5 Supplemental
50 Postnet