PROEMION CANlink wireless 3002 - 1.1.4 Conformity

Device Manual CANlink wireless
About the device
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 10
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
1.1.4 Conformity
For in-depth information on the corresponding tests, see chapter Certifications.
The device meets the requirements of the following standards and legal requirements:
Compliance with CE
This device complies with the directives, standards and normative documents listed in
the chapter Certifications.
Compliance with FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
conditions:
 The device may not cause harmful interference.
 The device must accept any interference received, including interference that may
cause undesired operation.
 The radio module has the FCC ID PVH0965.
See chapter Certifications.
Compliance with E1
This device has been approved by the KBA (Kraftfahrtbundesamt, Federal Office for
Motor Traffic) as compliant with Regulation No. 10. See chapter Certifications.