PROEMION CANlink wireless 3002 - 5.1.2 Configuration Interface

Device Manual CANlink wireless
Operation
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 93
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
5.1.2 Configuration Interface
The configuration interface appears when you create a new configuration, load a saved
configuration, or read a configuration from a CANlink wireless.
The configuration interface features the tabs D
EVICE, CAN RECEIVE, WLAN, BLUETOOTH, and
E
XPERT.
The name of the device to be configured and the configuration status are shown in the status
line.
Status Description
(UNSAVED CONFIGURATION)
New configuration which has not yet been saved.
(READ FROM DEVICE)
The configuration was read from the connected
CANlink wireless device.
Path to configuration file Save path of the configuration file.
* An asterisk (*) appears at the end of the line when changes
have not been saved.
Status line