Device Manual CANlink wireless
About the device
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 12
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
1.2.3 Starter kits
Starter kits are available for the device containing the following components:
CANlink wireless 3001 starter kit (part number 253000140)
> 1x CANlink wireless 3001
> 1x CAN cable M12 5-pin/D-Sub/Power terminal 15 ON
> 1x CAN bus termination D-Sub / D-Sub CANterm 120
> 1x USB-RS232 converter cable, M12 5-pin, 1.8 m
> 1x power supply unit
> 1x protection cap for flange plug M12
> 1x PROEMION Tools CD
CANlink wireless 3001 Bridge starter kit (part number 253000141)
> 2x CANlink wireless 3001
> 2x CAN cable M12 5-pin/D-Sub/Power terminal 15 ON
> 2x CAN bus termination D-Sub / D-Sub CANterm 120
> 1x USB-RS232 converter cable, M12 5-pin, 1.8 m
> 2x power supply unit
> 2x protection cap for flange plug M12
> 1x PROEMION Tools CD
To Next Page
Loading...
